View 2SC5476_335729.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:EN6069
NPN Epitaxial Planar Silicon Darlington Transistor
2SC5476
85V/3A Driver Applications
Applications
* Suitable for use in switching of L load (motor drivers, printer hammer drivers, relay drivers).
Package Dimensions
unit:mm 2041A
[2SC5476]
Features
* High DC current gain. * Large current capacity and wide ASO. * Contains a Zener diode of 9510V between collector and base. * Uniformity in collector-to-base voltage due to adoption of accurate impurity diffusion process. * High inductive load handling capability.
10.0 3.2
3.5 7.2 16.0 18.1
4.5 2.8
5.6
14.0
1.6 1.2 0.75 12 3 2.55
2.4
2.4 0.7
2.55
2.55
2.55
Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC
Tc=25C
1 : Base 2 : Collector 3 : Emitter SANYO : TO-220ML
Conditions
Ratings 85* 85* 6 3 5 0.5 2 20 150 -55 to +150
Unit V V V A A A W W
C C
Tj Tstg
* : With a Zener diode of (9510V).
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE fT VCE(sat) VBE(sat) VCB=70V, IE=0 VEB=5V, IC=0 VCE=3V, IC=1.5A VCE=5V, IC=1.5A IC=1.5A, IB=3mA IC=1.5A, IB=3mA 2000 6000 50 0.9 1.5 2.0 MHz V V Conditions Ratings min typ max 10 3 Unit A mA
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
40199TS (KOTO) TA-1387 No.6069-1/4
2SC5476
Continued from preceding page.
Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Inductive Load Voltage Symbol V(BR)CBO IC=0.1mA, IE=0 V(BR)CEO IC=1mA, RBE= Es/b L=100mH, RBE=100 Conditions Ratings min 85 85 15 typ 95 95 max 105 105 Unit V V mJ
Es/b Test Circuit
TUT L +VCC
SW
IB
RBE
6k
200 VCC=20V RBE=100 Tc=25C
3.0
I C - VCE
4mA 6mA 8mA
2m A
80 0 A
600
4.0
I C - VBE
VCE =5V
A
400A
3.5
2.5
Collector Current, IC - A
Collector Current, IC - A
A 1m
120 C
0 0.2 0.4 0.6 0.8 1.0 1.2
3.0 2.5 2.0 1.5 1.0 0.5 0
2.0
1.5
1.0
0.5
0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
100A IB= 0
4.5 5.0
Ta=
1.4
200A
1.6
25C -40C
1.8 2.0
2.2
2.4
Collector-to-Emitter Voltage, VCE - V
2 10000 7
Base-to-Emitter Voltage, VBE - V
5
hFE - I C
VCE =5V Collector-to-Emitter Saturation Voltage, VCE(sat) - V
VCE(sat) - I C
IC /IB=500
DC Current Gain, hFE
5 3 2 1000 7 5 3 2 100 5
= Ta
12
0C
3
2
C 25
-4
0C
1.0
Ta=-40C
25C
120C
7 5
7
0.1
2
3
5
7
1.0
2
3
5
7
3 5
7
0.1
2
3
5
7
1.0
2
3
5
7
Collector Current, IC - A
Collector Current, IC - A
No.6069-2/4
2SC5476
7
VBE(sat) - I C
IC /IB=500
10 7
IC - L
ICP
RBE=100 Tc=25C
Base-to-Emitter Saturation Voltage, VBE(sat) - V
5 5
Collector Current, IC - A
3
3 2
E S/B
=1
5m
J
2
Ta=-40C
1.0 7 5 3
25C
1.0
120C
7 5 5
7
0.1
2
3
5
7
1.0
2
3
5
2 5
7 1.0
2
3
5
7
10
2
3
5
7 100
2
Collector Current, IC - A
L - mH
2.4
Forward Bias A S O
10 7 5
P C - Ta
I CP IC
PC = 20
50s
Collecter Current, IC - A
3 2 1.0 7 5 3 2 0.1 7 5 3 2
W
Collecter Dissipation, PC - W
100s 200s
2.0
50 0 s
1m s
1.6
10
DC op er
No
1.2
ms
at io n
he
at
sin
k
0.8
0.4
Tc=25C Single pulse
2 3 5 7 10 2 3 5 7 100 2 0 0 20 40 60 80 100 120 140 160
Collecter-to-Emitter Voltage, VCE - V
24
Ambient Temperature, Ta - C
P C - Tc
Collecter Dissipation, PC - W
20
16
12
8
4
0 0 20 40 60 80 100 120 140 160
Case Temperature, Tc - C
No.6069-3/4
2SC5476
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of April, 1999. Specifications and information herein are subject to change without notice.
PS No.6069-4/4

▲Up To Search▲

Price & Availability of 2SC5476

	To Download 2SC5476 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .